Tools and accessories
As well as our range of tools and equipment to hire, we have an extensive range of accessories. From chisels to hammers, scalers, planers, sanders, drills, saws, heaters and dryers, we have them all under one roof.
Click here for a full range of our accessories.
view more >>
Needle/Chisel Scalers |
||||
 |
Model 1B | Needle Scaler | Chisel Scaler | |
| Length Weight B.p.m Air Consumption Needles A Type |
343mm (13.5") 1.6 kg (3.5 lbs) 3800 1.42 Ltr.sec (3 cfm) 29 x 2mm 12 x 3mm Straight |
313mm (12.3") 1.5 kg (3.3 lbs) 3800 1.42 Ltr.sec (3 cfm) -- -- Straight |
||
| Applications: Ideal size for all light duty de-scaling, de-rusting, paint chipping applications. Ease of handling when cleaning and stress relieving weld seams and joints.
|
||||
Needle/Chisel Scalers |
||||
|
Model 2B | Needle Scaler | Chisel Scaler | |
| Length Weight B.p.m Air Consumption Needles A Type |
375mm (14.7") 2.6 kg (5.7 lbs) 3000 2.6 Ltr.sec (5.5 cfm) 51 x 2mm 19 x 3mm Straight |
343mm (13.5") 2.0 kg (4.4 lbs) 3000 2.61 Ltr.sec (5.5 cfm) -- -- Straight |
||
| Applications: Ease of handling as with Model 1B for similar applications but with slightly heavier blow for medium duty use. In-line design allows confined areas to be reached easily.
|
||||
Needle/Chisel Scalers |
||||
  |
Model 2BPG | Needle Scaler | Chisel Scaler | |
| Length Weight B.p.m Air Consumption Needles A Type |
315mm (12.4") 2.6 kg (5.7 lbs) 3000 2.6 Ltr.sec (5.5 cfm) 51 x 2mm 19 x 3mm Pistol Grip |
260mm (10.2") 2.0 kg (4.4 lbs) 3000 2.6 Ltr.sec (5.5 cfm) -- -- Pistol Grip |
||
| Applications: Same power capabilities as the 2B 'straight' model but preferred by operators who like a pistol grip type tool. Ideal for removal of hardened concrete from contractors plant and machinery.
|
||||
Needle/Chisel Scalers |
||||
 |
Model 3B | Needle Scaler | Chisel Scaler | |
| Length Weight B.p.m Air Consumption Needles a a Type |
465mm (18.3") 4.5 kg (10 lbs) 2200 3.8 Ltr.sec (8 cfm) 65 x 2mm 28 x 3mm 19 x 4mm Handel Grip |
426mm (16.8") 3.4 kg (7.5lbs) 2200 3.8 Ltr.sec (8 cfm) -- -- -- Handle Grip |
||
| Applications: The 'original' general duty Needle Scaler - powerful enough to tackle any surface preparation in such industries as Civil Engineering, Construction, Marine, Petro-Chemical etc.
|
||||
Needle/Chisel Scalers |
||||
|
Model 3BPG | Needle Scaler | Chisel Scaler | |
| Length Weight B.p.m Air Consumption Needles 28 x 3mm 19 x 4mm Type |
342mm (13.5") 3.7 kg (8.2 lbs) 2200 3.8 Ltr.sec (8 cfm) 65 x 2mm 28 x 3mm 19 x 4mm Pistol Grip |
339mm (13.4") 3.0 kg (6.6lbs) 2200 3.8 Ltr.sec (8 cfm) -- -- -- Pistol Grip |
||
| Applications: Same power capabilities and applications as the 'original' 3B model but pistol grip handle to give optimum weight distribution.
|
||||
Needle/Chisel Scalers |
||||
|
Model 4B | Needle Scaler | Chisel Scaler | |
| Length Weight B.p.m Air Consumption Needles |
482mm (19") 5.6 kg (12.4 lbs) 2200 4.0 Ltr.sec (8.5 cfm) 49 x 3mm 35 x 4mm |
440mm (17.3") 4.0 kg (8.8lbs) 2200 4.0 Ltr.sec (8.5 cfm) -- -- |
||
| Applications: The 'Heavy Duty' scaler for the toughest applications such as roughing and dressing concrete and aggregate exposure, also ideal for removing the hardest marine growth and corrosion.
|
||||
Chisels |
|||
| Blade | Width | Length | |
| Flat Flat Flat Flat Cranked Cranked Mortar Rake *Flat *Spark-resistant for use in fire hazard areas. |
19mm (3/4") 19mm (3/4") 62mm (2. 1/2") 62mm (2. 1/2") 34mm (1. 3/8") 34mm (1. 3/8") 12 x 6mm (1/2" x 1/4") 50mm (2") |
175mm (7") 250mm (10") 175mm (7") 250mm (10") 175mm (7") 250mm (10") 200mm (8") 175mm (7") |
|
| Common to all models when fitted with the standard (12mm) 1/2" sq. bush chisel holder.
|
|||
view more >>
Scabblers/Scaling Hammers |
||||
 |
Model 1B a Length Weight B.p.m Air Consumption Height Stroke Piston Diam. |
Model SH-1S Standard Duty 485mm (19.1") 2.5kg (5.5 lbs) 3800 2.1 Ltr.sec (5 cfm) 152.5mm (6.0") 26.5mm (1.04") 27mm (1.06") |
Model SH-1H Heavy Duty 485mm (19.1") 2.6kg (5.7 lbs) 2500 2.7 Ltr.sec (6.5 cfm) 175.2mm (6.9") 26.5mm (1.04") 27mm (10.6") |
|
| Model 1B a Length Weight B.p.m Air Consumption Height Stroke Piston Diam. |
Model SH-3S Standard Duty 485mm (19.12") 3.7kg (8.1 lbs) 3000 x 3 5.2 Ltr.sec (11 cfm) 152.5mm (6.0") 26.5mm (1.04") 27mm (1.06") |
Model SH-3H Heavy Duty 484mm (19.1") 6.0kg (13.2 lbs) 2300 x 3 6.8 Ltr.sec (14.3 cfm) 175.2mm (6.9") 26.5mm (1.04") 27mm (10.6") |
||
| Applications: Construction - Concrete scabbling/dressing. Laitence removal of the weaker surface layer where extreme bearing strength is to be applied. Aggregate exposure on decorative panels. Marine - De-Scaling/De-rusting/paint and marine growth removal from all steelwork such as ships decks and hulls. Ideal for use in conjunction with the Scaleforce Eleven Scaler. Special Features - Replaceable tungsten carbide tipped piston heads for fast change on site without need to dismantle the scaler - Secondary side handle (Triple Scaler) - Side entry of Triple Scaler main handle to give in-line scaler - Spark resistant heads for fire hazard areas. |
||||
view more >>
Long Reach Scalers |
|||
| Model Length Weight (steel) Weight ('Lite'-aluminium) B.p.m Air Consumption |
LR2 740mm (29") 3.7 kg (8.2 lbs) - 2200 2.1 Ltr.sec (4.5 cfm) |
LR4 1100mm (43") 4.9 kg (10.8 lbs) 3.0kg (6.6 lbs) 2200 2.1 Ltr.sec (4.5 cfm) |
|
| Model Length Weight (steel) Weight ('Lite'-aluminium) B.p.m Air Consumption |
LR5 1400mm (55") 5.5 kg (12.2 lbs) 3.4 kg (7.5 lbs) 2200 2.1 Ltr.sec (4.5 cfm) |
LR6 1710mm (67") 6.1 kg (13.5 lbs) 3.8kg (8.4 lbs) 2200 2.1 Ltr.sec (4.5 cfm) |
|
| Accessories: Scraper Assembly 200mm (8") Blade Chisel 50mm (2") Blade (also available in spark-resistant aluminium bronze) Scraper Assembly 300mm (12") Blade Chisel 100mm (4") Blade (also available in spark-resistant beryllium copper) Needle Scaling attachment |
|||
| Applications: Removal of unwanted material from floor, walls, production equipment - floor/wall tile removal (carpet and ceramic) plaster removal - paint/resin/glue/chemical removal from mixing vessels/chutes/etc. Removal of old roofing materials. Light duty concrete scabbling with needle attachment. Special Features: Positive accessory retention - fast interchangeability between chisels/scrapers/needle attachment/very low air consumption - can be operated from small portable compressor. Interchangeability between scraper blades 'Lite' versions make overhead work effortless. |
|||
view more >>
Long Reach Scabbler/Tamper |
||
| Model LRS55 - Scabbler Length Weight (steel) B.p.m Air Consumption Head Diameter |
LR2 1392mm (54.8") 12.25 kg (27 lbs) 1100 11.6 Ltr.sec (25 cfm) 57mm (2.25") |
|
view more >>
'Scaleforce' Eleven Multi-Head Scaler |
||
| Model SF-11 Length (handle lowered) Length (handle upright) Weight B.p.m Air consumption Stoke Piston diam. Head dimensions |
LR2 1300mm (51.2") 1230mm (48.4") 37.2kg (82lbs) 2300 x 11 23.6 Ltr./sec (5 cfm) 26.5mm (1.04") 27mm (1.06") 285mm (11.2") length 150mm (5.9") width 180mm (7.1") depth |
|
| Applications: Marine - Large area corrosion control for all duties on-board ship and off-shore platforms. De-scaling/De-rusting removal of paint and marine growth on all steelwork. General - Removal of floor coatings paint/epoxy/etc. Special Features- Replaceable tungsten carbide tipped piston heads - changeable on site - vibration reduced mountings for comfortable operation - up to the edge scaling - multi positional handle. |
||
view more >>
TFP 200 Multi-Planer |
|||
| TFP 200 Height Width Depth Cutter head speed Working width Working distance from wall with edger attachment Weight of machine complete Weight of cutter head c/w TCT cutters Power supply Honda GX 160 Robin EY20 110v, single phase Engine/motor speed Also available: 240v, 415v, propane and air motor |
PetrolLR2 905mm (35.6") 340mm (13.4") 940mm (37.0") 1833 rpm 200mm (8.0") 45mm (1.8") 5mm (0.2") 49kg (108 lbs) 7kg (3.2 lbs) -- 5.5hp/4kw 5hp/3.7kw -- 3000rpma |
Electric 905mm (35.6") 340mm (13.4") 940mm (37.0") 1753 rpm 200mm (8.0") 45mm (1.8") 5mm (0.2") 54kg (119 lbs) -- 7kg (3.2 lbs) -- -- 3hp/2.2kw 2870rpma |
|
| Applications: For concrete keying, texturing, planing and grooving. Road marking, roof chipping removal. Paint, coatings and laitance removal from new floors. Special Features- All electric motors have thermal overload protection. Accurate depth control for precise texturing, fully height adjustable handlebar, heavy duty construction, built in safety handbrake. |
|||
view more >>
Moil Point |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 910011 910023 910024 910043 910044 912063 912064 912083 912084 |
910011 910023 910024 910043 910044 912063 912064 912083 912084 |
910011 910023 910024 910043 910044 912063 912064 912083 912084 |
||
Narrow Chisel |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 910211 910233 910234 910253 910254 912273 912274 912293 912294 |
240 380 450 380 450 380 450 380 450 |
19 x 50 22 x 82 22 x 82 25 x 108 25 x 108 28 x 160 28 x 160 32 x 160 32 x 160 |
||
Heavy Duty Burster |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 910925 910926 912927 912928 |
380 380 380 380 |
22 x 82 25 x 108 28 x 160 32 x 160 |
||
Broad Chisel/Asphalt Cutter
|
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 910420 910430 912440 912450 |
380 380 380 380 |
22 x 82 25 x 108 28 x 160 32 x 160 |
||
Asphalt Cutter 125 x 50mm |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 912462 912472 |
380 380 |
28 x 160 32 x 160 |
||
"Standall" Asphalt Cutter
|
||||
| Part No. | Length b/c mm | Shank Size mm | ||
| 910424 910434 912444 912454 |
380 380 330 330 |
22 x 82 25 x 108 28 x 160 32 x 160 |
||
Tarmac Cutter
|
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 910435 912545 912555 |
300 280 280 |
25 x 108 28 x 160 32 x 160 |
||
Digging Chisel 75 x 230mm |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 910426 910436 912446 912456 |
355 355 355 350 |
22 x 82 25 x 108 28 x 160 32 x 160 |
||
Digging Spade 120 x 190mm |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 910636 | 355 | 25 x 108 | ||
Digging Spade 125 x 205mm |
||||
|
Part No. | Length b/c mm | Shank Size mm | |
| 912646 912656 |
350 350 |
28 x 160 28 x 160 |
||
Digging Spade 125 x 205mm |
||||
|
Part No. | Length b/c mm | Shank Size mm | |
| 912646 912656 |
350 350 |
28 x 160 28 x 160 |
||
Digging Spade 150 x 150mm |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 912746 912756 |
300 300 |
28 x 160 32 x 160 |
||
Clayspade |
|||||
 |
Spade Size | Part No. | Length b/c mm | Shank Size mm | |
| 100 x 165 125 x 205 125 x 205 140 x 230 140 x 230 |
910913 910662 910664 912666 912668 |
380 430 430 380 380 |
22 x 82 22 x 82 25 x 108 28 x 160 32 x 160 |
||
Plug & Feather Set |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 912888 912890 912908 912907 912909 |
660 660 305 380 450 |
28 x 160 32 x 160 -- Feathers in Pairs |
||
Tamping Pad Stem to suit |
||||
 |
Part No. | Length b/c mm | Shank Size mm | |
| 910910 910911 912905 -- 912901 912903 912906 |
205 205 -- -- 230 230 |
Stem 22 x 82 25 x 108 5" Round Pads Stem 28 x 160 32 x 160 7" Round Pa |
||
We can supply a wide range of tools and accessories from the following list,
|
|||
|
Hydraulic Impact Breakers
Montabert Krupp Indeco Stanley Atlas Copco NPK Rammer/Roxon Furukawa Allied Okada Compair Toku |
Electric Hammers SDS Max - SINGLE CHISEL Integral Shank Spiral Drills SDS Max - CROSSHEAD Integral Shank Spiral Drills SDS Plus - Integral Shank Spiral Drills SDS Plus - Quickfit SDS Plus Drill Holders SDS Plus - Chuck Adaptors Kango - Integral Shank Spiral Drills Hilti - Integral Shank Spiral Drills Bosch - Spit Ramset Bosch - Integral Shank Spiral Drills Hitachi/Makita - with 26mm diameter body Hitachi/Makita - with 32 mm hexagon body flat to flat Hitachi/Makita - with 32mm hexagon body point to flat Wacker Tek - CROSSHEAD Integral Shank Spiral Drills Percussive Tool Accessories 9 Point Pad Bush Hammer Stems Skutch Comb and Concrete Cutter Comb Holders K Taper Shank - Spiral Drills K Taper Shank Adaptors Heavy Duty Core Drills Tungsten Carbide Tipped Core Drill Accessories Light Duty Core Drills Tungsten Carbide Tipped Light Duty Core Drills Accessories |
||
